 |
|
 |
 |
| Work Summary |
maseczki ochronne A medical mask, also referred to as an oral or facial
mask, is meant to be worn by medical professionals in healthcare settings. It's designed to prevent
inhalation of bacteria and droplets in the air by capturing airborne bacteria that are shed from the
mouth and nostrils of the wearer and capturing them in a protective covering.
There are many
different types of medical masks available and are used by many different medical professionals.
The many different materials used to make medical masks range from latex to silicon. Latex masks
have long been a preferred material by many medical professionals because of their ability to resist
bacteria and other contaminants while maintaining sufficient ventilation. However, while they are
resistant to infections and contaminants, latex masks can deteriorate and may not provide adequate
ventilation or are too thin. While they are stronger than many other kinds of health mask materials,
they are not ideal for long periods of usage.
Polystyrene, also known as Styrofoam or
High-Density Silicon, is a relatively new sort of medical mask material. This type of mask is similar to
a plastic container, which is usually produced from a high density foam that has an airtight seal when
stuffed with medical waste and put inside the hospital.
Styrofoam is normally thick enough to
prevent bacteria from getting into the individual 's respiratory system and is designed in such a way
that air can be pumped through the mask quickly. Because it is not thick, it's also able to move around
freely, keeping the nose clean and the mouth dry and avoiding contamination from the patient's sneezing,
coughing or breathing deeply. They are more expensive than other medical mask materials but have proven
to be an effective option for hospital employees.
Silicone is a natural product and so won't
degrade over time like other materials. It has a water-resistant covering and can be easily molded into
any shape or form, making it very versatile. However, it's much less readily cleaned as other materials
and requires frequent replacement or professional cleaning.
Since these masks are intended for
use by healthcare employees, they should be cleaned and disinfected on a regular basis to help keep the
patient and staff protected. This should be done by a trained professional using antibacterial
solutions, which is usually included in any equipment bought by the hospital or medical facility.
Cleaning is easy since the substances are nonporous and there are no chemicals used to wash them.
They require only a simple wipe down with a damp cloth or wet wash cloth to remove excess moisture and
germs. In cases of excessive wear, like in the case of prolonged hospital work hours, it's important to
clean the mask often to avoid contamination and ensure a new infection-free atmosphere.
To
disinfect the mask, sanitizer solutions should be poured into a spray bottle and allowed to soak into the
foam. The solution should then be permitted to sit for thirty minutes, so it doesn't soak into the mask
but rather to the skin beneath. After the sanitizer has been applied, it's important to rinse off the
mask completely with clean water to remove any residual sanitizer.
Cleaning masks in the
hospital can be a pain for the staff members, but if done properly can prevent infections and reduce
costs by protecting the staff and patients from contaminants that can infect them. Even a simple
solution of one cup of bleach diluted in 2 quarts of water is enough to purge and sterilize the mask,
preventing it from spreading bacteria and potentially causing a severe infection.
Although
sanitizing is quite important other than the obvious reason of preventing contamination, the mask itself
may also need sanitizing to eliminate food, drink or other material which can get into the air during
use. For instance, if there are patients that are in and out of the space throughout the course of the
day, the mask can often become contaminated during their usage. Cleaning this region of the mask with a
bleach solution gives a clean-air area that prevents contamination and allows the air to flow freely.
Bleach solutions may also be used to sanitize tools and instruments in the room, in addition to clean up
droppings from patients and staff.
|
|
 |
 |
|
 |
|
